- Home page
Name of the client/building owner
Function of building
Restaurants & bars
Degree of enclosure
Mediterranean - mild winters, dry hot summers
Type of application of the membrane
Primary function of the tensile structure
- Sun protection
The brief at the Ostraco Hotel in Mykonos was to create a striking tensile structure to provide shelter for the poolside bar whilst making an architectural statement.
The client requested a light-weight canopy structure that would not heavily impact the pool area. A basic requirement was the introduction of wooden and stainless steel elements following the naval history and tradition of the island. The fabric had to be able to transmit a certain amount of light in order to become a light, bright space so PVC coated polyester fabric was recommended. PVC-PVDF coated polyester (Type II) was chosen as a reasonably priced and tough material capable of surviving the hot Mediterranean weather and the extreme design wind speeds of 33m/sec.
Tensis was approached by the client to achieve this requirement. The design and engineering was carried out entirely by structural engineer Argiris Chatzidis
The canopy needed to be connected back to the existing building without touching the freestanding blockwork or having tie cables in the pool area. Therefore sloping beam elements were introduced and precise survey and engineering was required. This was achieved through attachment to the main buildings and distributing most of the load into the ground through tensioned cables. The structure appears to float above the landscape, drawing your attention to the focal point of criss-crossing cables.
Another challenge in this project lay in fitting the canopy into the surrounding environment within absolute minimum tolerances as all elements on the site were built before the canopy was installed.
The project was particularly fast track due to the summer season opening of the Hotel, giving a mere 6 weeks to survey, design manufacture and install. The deadline was kept and all parties involved are excited with the structure which looks stunning and provides an attractive environment integrated with the surrounding buildings of the particular Cycladic architecture.
Material of the cover
FERRARI 1002 S
Main dimensions and form
Covered surface (m2)
Duration of use
Temporary or permanent structure
Design lifespan in years